Blog

Here’s your monthly maintenance checklist, ● Check the track cover for proper operation and lubricate with light oil if necessary. ● Clean any sediment or debris from inside the machine. ● Empty the oil drain pan ● Check the oil level in the gearbox. If oil is not visible on the bottom edge of the gauge, remove the end panel and add through the top hole of the filter until oil is visible on the gauge screen.  Here are 4 points in the checklist, which can vary with the machine types or might add more steps like these. EngiMach will help you connect with our expert partners who can provide you with a personalised monthly list for better CNC conditions monitoring.